February 2007 Meeting

Tuesday, February 6th, 2007

Surface Engineering Seminar

This special all day seminar has two options for attendance.

All Day
Evening Dinner Key Note only

Register Online for Dinner Keynote only

Download Program Brochure:
Surface Engineering Program

Download Registration Form:
Surface Engineering Registration

Registrants:
SES Registrants

Exhibitors:
SES Exhibitors

All Day Session

Keynote/Dinner Only

Session I: 9:00 am 10:30 am
10:30 am 10:45 am Break
Session II: 10:45 am 12:15 am
12:15 pm 1:30 pm Buffet Lunch
Lunch – n – Learn: 12:30 pm 1:30 pm
Session III: 1:30 pm 3:00 pm
3:00 pm 3:15 pm Break
Session IV: 3:15 pm 4:45 pm

Social Hour & Display Tables: 4:45 pm 6:30 pm
Key Note Speaker: 7:30 pm 8:30 pm

Dr. Daniel Branagan, Nano Steel Company, Idaho Falls, Idaho, USA, Nano Composite Wire-Arc, HVOF, High Corrosion Hard Chrome Coatings.

Speaker Schedule

Session I: 9:00 am 10:30 am

Session Chairs: Wayne Quantz & Paul Kovach

9:00 am 9:30 am

Dan Allford, ARC Specialties, Houston, TX, USA, Comparison of Wear Resistant GMA/ Composite, OAW & PTA Coatings using G 65 & B 611

9:30 am 10:00 am

Jean Marc Tetevuide, Durum USA, Conroe, TX, USA, Erosion Resistant Coatings Mechanisms, Influence & Performance

10:00 am 10:30 am

Dr. Purush Sahoo, ASM LLC, (formerly with Sulzer Metco), Houston, TX, USA, Industrial Gas Turbine Coatings State of Art

10:30 am 10:45 am Break

Session II: 10:45 am 12:15 am

Session Chairs: Mike Andrus & Randy Manual

10:45am 11:15 am

Mike Andersen, Falex Corporation, Sugar Grove, IL USA, Realizing Bench Test Solutions to Field Tribology Problems by Utilizing Tribological Aspect Numbers

11:15 am 11:45 am

Wayne Quantz, Quantz & Associates Inc., Houston, TX, USA, Evaluation of Engineered Surfaces Utilizing Standard ASTM Tests

11:45 am 12:15 pm

George Waid, Corrosion Testing Services, Taft, TN, USA, Corrosion Testing

12:15 pm 1:30 pm Buffet Lunch

Lunch – n – Learn: 12:30 pm 1:30 pm

Mike Burns, Metallurgical Consultant, Houston, TX or Texas PE Board, Austin, TX, Engineering Ethics

Speaker Schedule

Session III: 1:30 pm 3:00 pm

Session Chairs: Bob Koester & Dan Scott

1:30 pm 2:00 pm

Dr. Daniel Branagan, NanoSteel Company, Idaho Falls, Idaho, USA, Hard Metal Alternative Technology Hard Facing

2:00 pm 2:30 pm

Dr. Jim Wu, Stellite Coatings, Goshen, IN, USA, Wear Resistant Alloys

2:30 pm 3:00 pm

Andreas Kirsten, Carbide & Metal (formerly with

Sulzer WOKA), Immelborn, Germany, Carbide Variations for Different Hard Facing Applications

3:00 pm 3:15 pm Break

Session IV: 3:15 pm 4:45 pm

Session Chairs: Purush Sahoo & Timothy Haeberle

3:15 pm 3:45 pm

TomGlynn, Stellite Coatings, Canada, PTA and HVOF Coatings

3:45 pm 4:15 pm

Dr. Gary L. Doll, The Timken Company, Canton, Ohio, USA, Industrial Applications Using Nano Composite Tribological Coatings

4:15 pm 4:45 pm

Yosuke Muira, Mitsubishi Materials Corp., Saitama, Japan, PTA – Hard Facing Alloys

Social Hour & Display Tables: 4:45 pm 6:30 pm

6:30 pm 7:30 pm Buffet Dinner

Key Note Speaker: 7:30 pm 8:30 pm

Dr. Daniel Branagan, Nano Steel Company, Idaho Falls, Idaho, USA, Nano Composite Wire-Arc, HVOF, High Corrosion Hard Chrome Coatings.

8:30 pm Close

Seminar Information

Program Chairman:

Anil Kumar, ReedHycalog
ph: 713-924-5718, cell:713-724-1544

Seminar Location:

Bradys Landing Restaurant
8505 Cypress St Houston, TX 77012
Map to Brady’s Landing

Registration Fee

ASM members or sustaining members $200.00, non-members $325.00, speakers $150.00, full time students free (school ID required). You may pay by check or credit card.

Registration fee includes include lunch buffet, social hour, dinner buffet, snacks/ soft drinks – tea, coffee, water and social hour drinks.

Early Registration Discount

A $ 50.00 early registration discount is available until January 15, 2007.

Exhibitors

Table-top-displays are available at $100.00 each. Individual tables with white table cover, 6 or 8 feet long x 2 feet wide are available to market your product and services.

Conference Proceedings

Speaker presentation CD will be available at a nominal cost at the registration.

Lunch-n-Learn

Engineering Ethics, Texas PE 1.0 hour credit course, will be available during 12:30 to 1:30 pm lunch hour.

Hotel

Recommend Houston Hobby Airport Marriott, 9100 Gulf Freeway (I-45 South), Houston, TX 77017, phone 713-943-7979

Map to Brady’s Landing

From Bush Intercontinental Airport take JFK Boulevard to North Belt 8 west. Go several miles, take Gulf Freeway South (I-45 S), pass 610 North loop and down town Houston. Take 610 East to 225 West. Exit 225 West and turn right on Broadway. Take Broadway several blocks to Cypress street and turn right (at Funeral home). Bradys landing entrance is onleft.

Directions from Houston Hobby Airport: From Gulf freeway (I-45N) take 610 loop east. Exit 225 West and turn right on Broadway.Take Broadway several blocks to Cypress street and turn right (at Funeral home). Bradys landing entrance is on left.